Build Sheet & Custom Fuse Box design. - Page 2

SwL_Wildcat · 10-23-2023, 07:16 AM

Quote:

Originally Posted by CalgaryZL1

Has anyone got a plate made for their 2024 CE yet? I think the panther logo would look cool on it.

Not mine, but off their site. Looks pretty good!

SHE'Z 18 · 10-23-2023, 12:08 PM

Has anyone had one one of these made for a “modified” Camaro? The “stock” info/format looks great, but with mods, some of the details will change. Thanks all!!

DevilsReject97 · 10-23-2023, 12:31 PM

Quote:

Originally Posted by SHE'Z 18

Has anyone had one one of these made for a “modified” Camaro? The “stock” info/format looks great, but with mods, some of the details will change. Thanks all!!

I would imagine all of that could be modified to a point in the Features section....along with the updated HP/TQ

CalgaryZL1 · 10-23-2023, 03:43 PM

Quote:

Originally Posted by SHE'Z 18

Has anyone had one one of these made for a “modified” Camaro? The “stock” info/format looks great, but with mods, some of the details will change. Thanks all!!

You can request anything you want, they send you a rough draft. Then sign off when you are happy. Just supply a list of what you want included.

SSShark · 10-23-2023, 06:46 PM

I didn't see it posted, so here is the new GM link for the build sheets.
vehicleinvoice@gmmediaarchive.com
I believe there is charge for it.

SSShark · 10-24-2023, 08:27 AM

Quote:

Originally Posted by SSShark

I didn't see it posted, so here is the new GM link for the build sheets.
vehicleinvoice@gmmediaarchive.com
I believe there is charge for it.

I just got my build sheet this morning. It took them one day to reply and it was free. The format is a little different than previous versions but it should have everything that you need.

knighti2 · 10-24-2023, 08:51 AM

Quote:

Originally Posted by overdriv

How are you guys holding them onto the fuse block cover?

Have had any problems with underhood heat of hot summer sun loosening the adhesive on what ever you are using?

I drilled very small holes and put zip tie through it.

DamonZ28 · 10-24-2023, 08:01 PM

Installed mine today. I used 3M double sided trim tape.

NYTMARE23 · 10-24-2023, 08:08 PM

Used button head rivets to install mine. Since everything under the hood gets SUPER hot. I didn't want the 3M tape getting gooey and losing the adhesiveness. Maybe it wouldn't? But didn't want to risk it

SHE'Z 18 · 10-24-2023, 09:16 PM

Quote:

Originally Posted by CalgaryZL1

You can request anything you want, they send you a rough draft. Then sign off when you are happy. Just supply a list of what you want included.

Awesomeness!! Thanks everyone

JoeCamaro444 · 10-25-2023, 12:34 AM

Quote:

Originally Posted by BlackbeastSS2

I saw this on an earlier thread on how to get a build sheet and then saw a website that dresses up custom fuse boxes for any brand of a car. I decided to contact both places yesterday and within less then 8 hours I had my design. Now just waiting for a tracking number with shipment details.

The email is legit and I used it yesterday and got my build info back in 4 hours.

socialmedia@gm.com

I then sent my info to Chris at Deadbrand Designs and he made up a custom design for the top of the fuse box lid for only $78.00

chrisfrech@yahoo.com

You just suggest ideas to Chris and he comes up with a design and you just tweak it till your happy with it.

Awesome!

This forum is great. Gives me so many ideas of how to spend more money on my Camaro! lol

Just emailed for my build sheet. Next up, I’ll be ordering one of these custom plates, to dress up the fuse box. Thank u!

CalgaryZL1 · 10-25-2023, 01:53 AM

Here is mine with a list of upgrades that I requested, you can actually fit a lot of info on this plaque. I just picture framed the backside with some thicker 3m double side because the lid does have a very slight crown and it has held up good with the heat so far.

arpad_m · 10-25-2023, 03:40 AM

Quote:

Originally Posted by JoeCamaro444

Awesome!

This forum is great. Gives me so many ideas of how to spend more money on my Camaro! lol

Just emailed for my build sheet. Next up, I’ll be ordering one of these custom plates, to dress up the fuse box. Thank u!

Did you send it to the new email address, vehicleinvoice@gmmediaarchive.com as SSShark stated above? The GM social media email has been reported to no longer work for several years.

BlackbeastSS2 · 10-25-2023, 12:17 PM

Quote:

Originally Posted by arpad_m

Did you send it to the new email address, vehicleinvoice@gmmediaarchive.com as SSShark stated above? The GM social media email has been reported to no longer work for several years.

I just update the email address at the start of the post.

10-24-2023, 08:01 PM	#22
DamonZ28 Drives: 2020 Camaro 2SS Join Date: Nov 2022 Location: Janesville, WI Posts: 592 View My Garage	Installed mine today. I used 3M double sided trim tape. Attached Images __________________ 2020 Camaro 2SS - Riverside Blue, NPP, Magnetic Ride, Sunroof RUXIFEY Smoked LED Side Marker Lights / Black SS emblem on rear bumper / Blue SS vinyl overlay on front bumper emblem / Wildhammer Rear Dark Reflectors / Trim Illusion Gloss Black Door Handle Covers / eBay Black Fuel Door / Screaming Chicken Fender Hash Marks / Color-Matched G2 Caliper Paint CT Sounds Tropo 10" Sub / Hifonics Zeus ZRX1200.1D amp / JL Audio LoC-22 line output converter / Sub Thump Plug N Play T-Harness With ANC Defeat Harness Kit My Camaro Journal

10-24-2023, 08:08 PM	#23
NYTMARE23 NYTMARE23 Drives: Black 2023 ZL1 A10 Join Date: Oct 2022 Location: Nebraska Posts: 478	Used button head rivets to install mine. Since everything under the hood gets SUPER hot. I didn't want the 3M tape getting gooey and losing the adhesiveness. Maybe it wouldn't? But didn't want to risk it Attached Images __________________ 2023 A10 ZL1 "NYTMARE" ‐‐--------------------------------------------------------

10-25-2023, 01:53 AM	#26
CalgaryZL1 Drives: 2020 Chevy Camaro ZL1 Join Date: Apr 2023 Location: Calgary Canada Posts: 1,634	Here is mine with a list of upgrades that I requested, you can actually fit a lot of info on this plaque. I just picture framed the backside with some thicker 3m double side because the lid does have a very slight crown and it has held up good with the heat so far. Attached Images

10-23-2023, 12:08 PM	#16
SHE'Z 18 Drives: 18 ZL1 - M6 Join Date: Mar 2019 Location: MI Posts: 446	Has anyone had one one of these made for a “modified” Camaro? The “stock” info/format looks great, but with mods, some of the details will change. Thanks all!!

10-23-2023, 06:46 PM	#19
SSShark Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018 Location: South Florida Posts: 1,218	I didn't see it posted, so here is the new GM link for the build sheets. vehicleinvoice@gmmediaarchive.com I believe there is charge for it.

User Name		Remember Me?
Password