09-27-2022, 10:45 PM | #1 |
Drives: 2019 Chevrolet Camaro SS Join Date: Apr 2021
Location: 405
Posts: 157
|
Power guesses on my setup!
What are you guessing in your experience the power of my car?
BTR S/C Cam 231-244 114 +5 .645" - .639" D1X Procharger that sees consistent 10 psi, 11psi sometimes Fore Innovations Dual in-tank pump Lt4 Injectors and HPFP e45-e50 10 speed trans |
09-28-2022, 07:22 AM | #2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,873
|
I'd say 720 if you have a good tuner
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
09-28-2022, 08:30 AM | #3 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,953
|
Has your tune been revised since this thread?
https://www.camaro6.com/forums/showthread.php?t=607852
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
09-28-2022, 10:27 AM | #4 |
Drives: Camaro 2SS 2017 Join Date: Jan 2022
Location: Sweden
Posts: 75
|
750 is my guess but dyno and tuner is some big factors.
__________________
2SS A8 D1X Stage 2, 3.7 pulley, Kooks LT 2″, Borla XPIPE/ GPI drop ins,Caddy Racing Lifters, ATI Damper, LPE GT35 Cam 42%, LPE Big Bore, FIC 30% Injectors, Fore Twin intank pumps, Flexfuel, MM wild catchcan.
865 WHP 743 LB FT 2Forge 19" wheels daily, Forgestar D5 17" for track |
09-28-2022, 05:41 PM | #5 | |
Drives: 2019 Chevrolet Camaro SS Join Date: Apr 2021
Location: 405
Posts: 157
|
Quote:
|
|
09-28-2022, 06:21 PM | #6 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,195
|
725rwhp + 625rwtq
__________________
2022 M6 ZLE: Katech Standard Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation Kit
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC + RF BG Coated AR Headers + GESI UHO Cats + V Bands + AWE Touring + Magnaflow Center X + MSD Coils + Banks iDash + JMS Booster ALL the BMR Read End Goodies + BMR Motor Mounts + JRE Terminator Cam Package + FIC 30 + DMS Front HX + Fender Tank GMS High Flow Impact Bar + GMS Stage II Oil Cooler + GMS Stage III HX System = 770rwhp 815rwtq @E55 13.5psi |
09-29-2022, 11:36 AM | #7 |
Drives: 2016 Camaro SS Join Date: Oct 2021
Location: Michigan
Posts: 293
|
Very similar to my setup. I would guess 750whp.
Probably more if you got your fueling sorted out. Don't think your LT4 injectors were getting you enough fuel. If you upgraded your fueling I would be interested in knowing what route you went as I am looking to upgrade my LT4's this winter.
__________________
2016 Camaro 2SS 759whp 686wtq tuned by KingLt1
Procharger D1SC - Forged internals BTR stage 3 cam - Circle Stage 3 trans American Racing headers - Borla S-type |
|
|
Post Reply
|
Tags |
cammed, horsepower, power, procharger d1x |
|
|